Master Edge Squeegee
for Electronic Screen Printers

MASTER EDGE SQUEEGEE are made in America of the finest polyurethane elastomers available. The casting process used ensures a uniform material, without voids, and hard or soft spots. These solvent resistant grades of polyurethane give the screen printer longer lasting, wear resistant printing edges. All MASTER EDGE SQUEEGEE are shipped with our special factory sharpened edge. These edges are the smoothest and sharpest available, to give you maximum printing performance. The smooth surface also enhances the squeegee life, by minimizing solvent penetration.

STANDARD SHAPES

Diamond	Double Bevel	Square Edge	Square Edge
(.375" x .375" x 24.0")	(.375" x .750" x 24.0")	(.250" x 1.25" x 24.0")	(.375" x 2.00" x 24.0")
"D"	"V"	"SE"	"EL"

Part Numbers

A full line of squeegee in wood, plastic and aluminum handles is available for manual printing.
Tech Mark ergonomic squeegee holders. Durometer Gauges, Tension Gauges, Squeegee Scissors, Squeegee Clipper (Corner Rounder), Screen Wash, Press Wash, & Squeegee Wash

Available factory direct from: Nick Latiano at: PRINTER'S EDGE LTD
Tel: 800-467-3343 Fax: 330-637-2901 4965 Mahoning Ave, Warren, OH 44483

Represented by: Four Points, SMT Stencil Supply, Buzzards Bay, MA 02532
****
Telephone:508-759-3848
Fax: 508-759-6056

MASTER EDGE SQUEEGEE
FOR
COMPACT DISC SCREEN PRINTING

MASTER EDGE SQUEEGEE are made in America of the finest polyurethane elastomers available. The casting process used ensures a uniform material, without voids, and hard or soft spots. These solvent resistant grades of polyurethane give the screen printer longer lasting, wear resistant printing edges. All MASTER EDGE SQUEEGEE are shipped with our special factory sharpened edge. These edges are the smoothest and sharpest available, to give you maximum printing performance. The smooth surface also enhances the squeegee life, by minimizing solvent penetration.

STANDARD SHAPES

Diamond	Double Bevel	Straight Edge	Straight Edge	Triple Durometer	Straight Edge
(.375" x .375") (3/16" x 1.0")	(3/16" x 3/4") (3/16" x 1.0")	(3/16" x 3/4") (3/16" x 1.0") (1/4" x 1.0") (1/4" x 1.0")	(3/8" x 1.5") (3/8" x 2.0")	(3/16" x 1.0")	(3/8" x 2.0")

STANDARD COLORS

All above shapes and durometers are available in 144" coils or in pieces cut to length.

Available factory direct from: Printer's Edge, 4965 Mahoning Ave, Warren, OH 44483

Tel: 330-637-2900 Fax: 330-637-2901

Represented by: Four Points, SMT Stencil Supply, Buzzards Bay, MA 02532
****
Telephone:508-759-3848
Fax: 508-759-6056

---

	| Home | Adhesives | Mesh | Frames | Pre Meshed Frames | Space Saver Frames | 304 Stainless | | Invar | Alloy 42 | Squeegee High Duro | Squeegee Low Duro | Accessories | | Suppliers | Specs | Newsletter | RoHS/WEEE | Search | Contact Us |
	Copyright © 2008 Four Points, SMT Stencil Supply